Installation; How To Hang The Lcd Television On The Wall - Panasonic TC-26LX50 Operating Instructions Manual

Installation

Receiver Location
Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including
reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
How to use the LCD stand
Adjust the stand to your desired angle.
The stand angle can be rotated 20 ° to the right / left.
Cable cover Removal and Reinstallation
Note: To avoid interference appearing on the screen, do not bundle the RF cable and AC cord together.
Opening Front Control Door
Optional External Equipment
The Video / Audio connection between components can be made with shielded video and audio cables. For
best performance, antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from
your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you'll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.

How to hang the LCD Television on the wall

This LCD Television is for use only with the following optional accessory. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
Wall-hanging bracket ........................................................ TY-WK32LX20W
•
WARNING:
• Failure to use Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount your unit will void your warranty.
• Always be sure to ask a qualified technician to carry out set up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
• For more details, please refer to the wall hanging bracket installation manual.
• Please contact your nearest Panasonic dealer for purchasing the wall-hanging bracket.
POWER
Y/POWER ON
R-STANDB
Removal
1. Push down hooks and pull
the cover slightly towards
yourself to disengage the
claws (at 3 points).
2. Slowly pull out in the
downward direction.
R-STANDBY/POWER ON POWER
PULL
Reinstallation
1. Insert the claws (at 3
points) at the bottom.
2. Push the cover until
hooks click into
place.
Raise the lower
part of the door
labeled "PULL".
7