NEC UNIVERGE BLUE ITK-6DGS-1 Start Manual page 18

INTERCOM
To Intercom a Station (Voice Announce):
Dial *90 and the extension number of the user you want to intercom.

CALLFLIP
To Transfer a Call to Your Other Devices:
While on a call, select the "Transfer" soft key, "Blind" soft key and Dial

your own extension number, then hang up.
CALL OR TRANSFER DIRECT TO AN EXTENSION'S VM BOX
To Leave a VM message by calling and extension's VM Box Direct:
Dial * and the extension number of the person to whom you want to

leave the VM.
To Transfer a Caller to Leave a VM message in the extension's VM Box Direct
(Quick Transfer to VM):
While on a call, select the "Transfer" soft key then Dial * and the

extension number of the caller to whom you want to leave the VM and
hang up.
ON-DEMAND CALL RECORDING
To Enable On-Demand Call Recording:
While on a call dial #9 or select the Record line key (programmed

previously via Control Panel) to start and stop the recording.
The recording feature must be enabled by your admin before the

feature can be used.
Note: Different states have different laws about the notification that calls are being recorded.
Administrators can choose whether to enable or disable a call recording announcement
based on their state's requirements.
If enabled, your call is being recorded plays when you start recording.
13