Advertisement
Enter the service Tag #. This can be found on a label attached to the back on your
system:
Step 3 Configure the hardware
Once your Lighthouse has been deployed and the hardware appliance has booted,
configuration is performed by browsing to the IP address of the NIC on the Dell hardware.
The Lighthouse NIC has a default static IP address of 192.168.0.1, and your computer
must have an IP address in the same network range (192.168.0.xxx). Alternately
Lighthouse NIC also has its DHCP client enabled by default, so it will automatically accept
any network IP address assigned by any DHCP server on your network – and will then
respond at both 192.168.0.1 and its DHCP address.
You will be presented with the login screen on your browser
Login using the default system user name,
You will then arrive at the
Your computer must have an IP address in the same network range as the
Note:
Lighthouse.
Lighthouse Quick Start (520060-Rev 1.0)
root,
Welcome to the Opengear Lighthouse
default
and the password,
screen
Page 2
Advertisement
