Sony HMZ-T1 Reference Manual page 18

3D Display
Auto 3D
3D Signal
Notification
Display
Back
Picture Mode
GB
18
Manually select the display format for 3D content. Available
settings vary depending on whether the source signal includes a
3D format identification signal, as follows.
For 3D content without a 3D format identification
signal
Over-Under: Select for top-and-bottom 3D content, with
similar images displayed on top and bottom.
Side-by-Side: Select for side-by-side 3D content, with similar
images displayed side by side.
Off: Select to display content in 2D format.
For 3D content with a 3D format identification signal
On: Select to display content in 3D format.
Off: Select to display content in 2D format.
Notes
• If 3D content is not displayed correctly using the selected settings, try
changing "Over-Under" to "Side-by-Side" or vice-versa.
• When selecting "Over-Under" or "Side-by-Side," change the setting to
"Off" after viewing 3D content.
On: Automatically switches to 3D display mode when a 3D
format identification signal is detected. If the 3D format
identification signal is no longer detected, the system will
automatically switch to 2D display mode.
Off: Deactivates this function.
Note
• If images do not appear in 3D when "Auto 3D" is set to "On," try
changing the "3D Display" setting.
On: Notifies you when a 3D format identification signal is
detected.
Off: Deactivates this function.
Returns to the previous menu.
Vivid: Vivid colours and sharp contrast, for concerts, sports,
and other televised content.
Standard: Emphasises a natural picture. Standard picture
quality for a variety of video sources.
Cinema: Picture quality designed especially for cinematic
content.
Custom: Stores your customised preferred picture quality,
adjusting from original flat picture.