Advertisement
Item Description
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screwdriver
Screwdriver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Use TT25 screwdriver to remove the 4 screws on the solar shield.
2.
Use TT25 screwdriver to remove 6 screws of upper and lower cover.
3.
Pull out the 4 antennas.
4.
Use PH1 screwdriver to remove the five screws on the antenna board.
5.
Remove 9 screws on PCBA with Ph1 screwdriver
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MF877-00
Template Revision B, 18-Nov-2016
Notes
Page 2
HPE instructions for this template are available at
Tool Size (if
applicable)
PH1
TT25
MF877-01
Quantity
of items
included
in product
Advertisement
