Advertisement
Product End-of-Life Disassembly Instructions
:
Networking
Product Category
Marketing Name / Model
[List multiple models if applicable.]
Aruba AP-587 Unified AP
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by
Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment
(WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
MF877-00
Template Revision C, 30-July-2018
Page 1
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
MF877-01
Quantity
of items
included
in product
1
0
0
0
0
1134
0
5 (AP587)
0
0
0
Advertisement
Table of Contents
Related Manuals for HP Aruba AP-587
Summary of Contents for HP Aruba AP-587
- Page 1 Marketing Name / Model [List multiple models if applicable.] Aruba AP-587 Unified AP Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Quantity of items Item Description Notes included in product Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
- Page 3 Remove accessories. Remove four M5 screws by using T25 Tamper Resistant Torx screwdriver from holder, then remove the holder. Remove eight M5 screws by using T25 Tamper Resistant Torx screwdriver, then remove the Top Cover. Remove five M3 screws by using PH2 Phillips Screwdriver. MF877-00 Page 3 Template Revision C, 30-July-2018...
- Page 4 Remove six Antenna cables from the Antenna Plate by hand, then remove it (include O-ring). Remove ten M3 screws by using PH2 Phillips screwdriver. Remove PSU connector from the PCBA by hand, then remove the PCBA. Remove five M3 and one M4 screws by using PH2 Phillips screwdriver, then remove the PSU. MF877-00 Page 4 Template Revision C, 30-July-2018...
- Page 5 Remove the air vent. 10. Remove four M3 screws by using T8 Tamper Resistant Torx screwdriver, then remove the GPS Cover. MF877-00 Page 5 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
Need help?
Do you have a question about the Aruba AP-587 and is the answer not in the manual?
Questions and answers