Monitor Driver Installation; Important Notice - LG BEJLB504N User Manual

Monitor Driver Installation

Monitor Driver Installation
When you install the Monitor Driver, resolution and
frequency are automatically set to the Monitor. So
you can work on the clearer display.
Monitor Driver Diskette will be provided for the 17-
inch or higher Model ( higher than 70kHz) with LCD.
If your monitor is not the one above or you lost the
diskette, you can download the driver on
http://www.lge.com
INSTALL
① Start Settings Control Panel.
② Double-click the Display icon.
③ Click the Settings tab, then click Change Display
Type.
④ Under Monitor Type, click Change
⑤ Insert the Monitor Installation Diskette into the floppy
drive and click OK.
⑥ Under Model list, select your LG Monitor, then click
OK. The monitor files are copied to the hard drive.
⑦ Click OK Close to save the settings.
⑧ Restart the system to activate the setting.
USB Install Guide
The following guide is only for the USB-Monitor
software support Monitor.
INSTALL
① Before Setting up the USB Program, Connect the
monitor to PC with the USB signal cable.
② Insert the "Monitor Installation Disk" into the floppy
disk drive.
③ Select the MNT_USB folder, and double click the
setup.
④"USB Monitor" window is displayed, click the "Next" ,
and repeat that.
⑤ Click the "Finish" button and setup is completed.
⑥ Select the "Display properties" , and then you use the
USB Monitor Function.
UNINSTALL
① Select the Settings and Control Panel, Double click
the "Add/Remove Programs" .
② Select the "USB Monitor" .
③ Click the "Add/Remove" button and the Program is
removed..
Caution: This Program is supported WINDOWS98 and Higher.

IMPORTANT NOTICE

for Windows® 95/98
This message may appear several times during
the installation of your monitor diskette.
Click Skip File to continue (Windows 98), Click
Yes to continue (Windows 2000).
This action will not harm your monitor or system.
Have Disk.
22
<Windows 98>
<Windows 2000>