Care And Cleaning - Husky HOLT6202BJ2 Use And Care Manual

Operation
1
Leveling Foot Adjustment
IMPORTANT : Ensure there is no weight on top of the
workbench when leveling.
□ Adjust each leveling foot (D) to the desired elevation with
a 5/8 in. wrench as shown.
□ Turn the lock nut counterclockwise to elevate and clockwise
to lower the leveling foot.
Maintenance
1
Maintaining the casters
□ Grease the casters annually using high quality
bearing grease .
2
Height Adjustment
□
Insert the crank handle (C) into the shaft and align it in the hole
until it is engaged.
□
To raise the table, turn the crank handle counterclockwise to
the desired height.
□
To lower the table, turn the crank handle clockwise until it
reaches the desired height.
□
To avoid damage, do not keep turning the crank handle once
it has rested at its highest or lowest position.
Note: Some minor squeaking is normal when operating the
crank. Lubrication is not needed.

Care and Cleaning

□ The steel in this product has been coated with industrial powder
coating for a durable finish. To help protect this finish, do not allow
harsh chemicals such as oil or grease to remain on the powder
coating surface. Use a glass cleaner ( Windex or equivalent product)
to clean and maintain all powder coated surfaces.
□ The wood top is made of Parawood (also called Rubberwood), which
has UV coating to help protect it from moisture. It can be
cleaned with most gentle household cleaners, such as Windex .
□ Do not allow chemicals, water, or other substances to remain on the
wood top for extended periods of time to reduce the risk of damage
to the wood.
9
Please contact 1-888-HD-HUSKY for further assistance.
®
®
HUSKYTOOLS.COM