Connecting The Display; Connecting With The Pc - LG W2284FT User Manual

Connecting the Display

Connecting with the PC

1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect the signal cable
connection.
3.
Connect the power cable
then plug the cable in the outlet.
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
[ Connecting the cables]
4.
Touch the power button
The 'Self Image Setting Function' will automatically run
when the monitor is on. (Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals.
'SET/AUTO' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the SET/AUTO function button to improve
resolution.
. When attached, tighten the thumbscrews to secure the
1
with the AC-DC adapter (AC-DC power supply)
3
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
in front to turn on the monitor.
A3
[ Arranging the cables]
DVI-D(This feature is not available in all countries.)
, and
2
Wall-outlet type
PC-outlet type