Advertisement
INSTRUCTION MANUAL
MOUNTING BLOCK
BEFORE USE ....
Thank you for choosing M-System. Before use, please check
contents of the package you received as outlined below.
If you have any problems or questions with the product,
please contact M-System's Sales Office or representatives.
■ PACKAGE INCLUDES:
MB-01
Mounting block body .......................................................(1)
Gasket ..............................................................................(1)
Closing panel ...................................................................(1)
Screws to attach the closing panel (M4 × 12) ................(2)
NPT fitting (option /P7 only) ...........................................(1)
Screws
Pan head screw (M4 × 60) ...........................................(2)
Plain washer for M4 ....................................................(2)
Spring washer for M4 ..................................................(2)
Nut for M4 ....................................................................(2)
MB-P1
Mounting block body .......................................................(1)
Gasket ..............................................................................(1)
Closing panel ...................................................................(1)
Screws to attach the closing panel (M4 × 12) ................(2)
NPT fitting (option /P7 only) ...........................................(1)
Screws
Pan head screw (M4 × 40) ...........................................(2)
Spring washer for M4 ..................................................(2)
Nut for M4 ....................................................................(2)
MB-08
Mounting block body .......................................................(1)
Gasket ..............................................................................(8)
Closing panel ...................................................................(8)
Screws to attach the closing panel (M4 × 12) ..............(16)
NPT fitting (option /P83 only) .........................................(1)
Screws
Pan head screw (M5 × 40) ...........................................(4)
Plain washer for M5 ....................................................(8)
Spring washer for M5 ..................................................(4)
Nut for M5 ....................................................................(4)
MB-16
Mounting block body .......................................................(1)
Gasket ............................................................................(16)
Closing panel .................................................................(16)
Screws to attach the closing panel (M4 × 12) ..............(32)
NPT fitting (option /P83 only) .........................................(2)
Screws
Pan head screw (M5 × 40) ...........................................(4)
Plain washer for M5 ....................................................(8)
Spring washer for M5 ..................................................(4)
Nut for M5 ....................................................................(4)
Note: The gasket and the closing panel are already attached
to the Mounting Block when one is shipped from the
factory. The NPT fitting is also attached to it when the
option is specified when ordering.
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
MODEL
■ MODEL NO.
Confirm Model No. marking on the product to be exactly
what you ordered.
■ INSTRUCTION MANUAL
This manual describes necessary points of caution when
you use this product, including installation, connection and
basic maintenance procedures.
MB
EM-3430 Rev.2 P. 1 / 5
Advertisement
Table of Contents
Related Manuals for M-system MB
Summary of Contents for M-system MB
- Page 1 BEFORE USE ..Confirm Model No. marking on the product to be exactly what you ordered. Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. ■ INSTRUCTION MANUAL If you have any problems or questions with the product, This manual describes necessary points of caution when please contact M-System's Sales Office or representatives.
- Page 2 (included in the transducer) to the base (included in the transducer) Mounting Screw Mounting Screw Screw attaching the base to the MB Screw attaching the base to the MB (included in the transducer) (included in the transducer) Base socket (included in the transducer)
- Page 3 (3). 2) Loosen the two screws (M3 × 16) attaching the Trans- Note: Put the closing panel back and the gasket onto the MB if ducer body to its base socket to separate them. the base socket is not attached immediately.
- Page 4 (3). For the P-UNIT Transducers, one unit requires a space Note 1: Put the closing panel back and the gasket onto the MB for two closing panels. Remove only the right closing if the base socket is not attached immediately.
- Page 5 4–6 (.24) dia. or M5 MB-08 MB-16 225 (8.86) 428 (16.85) 215 (8.46) 418 (16.46) ] indicates a space required for NPT fitting. EM-3430 Rev.2 P. 5 / 5 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp...
Need help?
Do you have a question about the MB and is the answer not in the manual?
Questions and answers