Canon Creative Park JAGUAR XKR Assembly Instructions Manual page 4

JAGUAR XKR : Assembly Instructions
1. Carefully score along the fold lines before cutting out.
2. As shown in the diagram, cut out the parts without cutting between the glue tabs.
3. Glue together carefully.
4. Cut between the glue tabs once the glue has completely dried.
Do not cut out yet.
Align the center lines.
Do not cut out yet.
Carefully add curves where necessary.
represents parts to add curves to.
Align the center lines, and curve the paper as you attach them.
Align the center lines.
Line up the glue spots and attach the pieces. Hold them together until the glue dries.
Cut out once the glue has dried completely.
- 4 - The lines in the diagram are divided as follows: (
Carefully add curves where necessary.
represents parts to add curves to.
Align the center lines.
Fold each glue tab carefully.
Carefully add curves where necessary.
represents parts to add curves to.
represents the underside of the paper.
Follow the order of the numbers in squares to assemble.
This diagram shows the left side.
Assemble the right side in the same way.
)Mountain fold (
Right side
)Valley fold.