Furman PS8 R II Owner's Manual page 11

P S - 8 R I I - P O W E R C O N D I T I O N E R / S E q u E N C E R
Maximum Load:
PS-8R II: 15 amps (1800 watts at 120 VAC)
PS-8R IIE: 10 amps (2300 watts at 230 VAC)
Operating Voltage:
90 to 140 VAC ("E" versions 180 to 280 VAC)
Over Voltage Shutdown:
140 VAC typically
("E" versions 260 VAC typically)
Delay Interval:
5 seconds (adjustable with internal trimpot)
Remote Switch:
Momentary or maintained action.
Remote Terminal:
Screw terminals or Eurostyle pluggable
Terminal Block, 2 for switch, 2 additional for
optional LED (22 ga. wiring minimum).
Spike Protection Modes:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
188 Vpk @ 3,000 amps, (133 VAC RMS)
"E" Version: 376 Vpk (266 VAC RMS)
Response Time:
1 nanosecond
Maximum Surge Current:
6,500 amps
Dimensions:
1.75" h x 19" W x 10.5" D.
Weight:
12 lbs.
Construction:
Steel chassis, .125" brushed and black anod-
ized aluminum front panel; glass epoxy printed
circuit boards
Power Consumption:
11 watts
Optional:
220/240V Versions (units with "E" suffix only)
are intended for use in countries with nominal
220 to 240 volt AC mains. Their rear panel out-
lets use internationally accepted IEC-320 con-
nectors.
Safety Agency Approvals: NRTL-C, CuL, CE listed.