Cisco N540-FH-CSR-SYS Install Manual page 25

Install the Device
Figure 25: Four Post Rack Type
Set up Device on Rack
You can set up the Cisco N540-FH-AGG-SYS on a rack.
Rack Mount
The device is shipped with rack mounting brackets that are to be secured on the sides of the device.
Caution
If the rack is on wheels, ensure that the brakes are engaged or the rack is otherwise stabilized.
Table 5: Cisco N540-FH-CSR-SYS Router Rack-Mount Kit
Quantity
2
8
4
1. Attach the rack-mount brackets and the cable guides to the router as follows:
a. The router has port-side intake modules, position the router so that its ports are facing the cold aisle.
Part Description
Rack-mount brackets
M4 x 0.7 x 7-mm Phillips flat-head screws
12-24 x 0.49 inches L, Philips pan head screws
Set up Device on Rack
Install the Device
25