Furman PL-8 Owner's Manual page 3

PL-8/PL-PLUS POWER CONDITIONER
into sensitive audio, video or computer
circuits.
The eight circuit-breaker protected
outlets are rated at 15 amps. If the total
load on the PL-8 (combining all outlets)
exceeds 15 amps, the circuit breaker
will trip, cutting off power to your rack.
If this occurs, reduce the load by
unplugging one or more units from the
PL-8. Then push the black button on
the circuit breaker (on the front panel)
down and in to reset it.
The PL-8's lamps come supplied
with five-watt night-light bulbs.
Replacements are readily available
at most hardware stores or almost
anywhere household light bulbs are
Light Switch
Dimmer Switch
sold. Bulbs are easily replaced without
removing the unit from the rack by
unscrewing the cap on the end of each
light tube. The caps and light tubes
become quite warm to the touch in
normal operation. To avoid burning
your fingers, allow the cap to cool
completely before unscrewing it. Be
careful not to push the tubes in while
the caps are unscrewed.
If you find that the heat from the tubes
is excessive, try reducing the setting of
the dimmer knob. As an alternative, you
may wish to substitute four-watt bulbs
or even colored Christmas tree bulbs.
The PL-8 has a master switch for the
rear outlets which lights up when the
Rack Lights
8 Switched Outlets
Circuit Breaker
Power Switch
2