Table of Contents
Advertisement
K
Increases/decreases the specified dis‐
tance
I
Switches between the variable limiter and
Active Distance Assist DISTRONIC
To operate Active Distance Assist
#
DISTRONIC or the variable limiter: press
the respective button with only one finger or
swipe on the control panel.
Switching between the variable limiter and
Active Distance Assist DISTRONIC
Press I.
#
Activating the variable limiter or Active Dis‐
tance Assist DISTRONIC
To activate without a stored speed: press
#
M, N or J. Active Distance
Assist DISTRONIC: remove your foot from
the accelerator pedal.
The current vehicle speed is stored and
maintained (Active Distance Assist
DISTRONIC) or limited (variable limiter) by
the vehicle.
or
To activate with a stored speed: press
#
J. Active Distance Assist DISTRONIC:
remove your foot from the accelerator pedal.
The last stored speed is called up and the
vehicle maintains this speed (Active Distance
Assist DISTRONIC) or does not exceed it (var‐
iable limiter).
If the stored speed has been deleted, the
current vehicle speed is stored.
%
When you switch off the vehicle, the stored
speed is deleted. When you activate Active
Distance Assist DISTRONIC, the last speed
stored for the variable limiter is deleted.
Increasing or reducing the speed
To increase the stored speed: swipe upwards
#
from the bottom of control panel 1.
The stored speed is increased by 1 km/h.
R
To decrease the stored speed: swipe down‐
#
wards from the top of control panel 1.
The stored speed is decreased by
R
1 km/h.
or
Driving and parking 207
Briefly press M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced by
10 km/h.
or
Press and hold M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced in
increments of 10 km/h.
or
Accelerate the vehicle to the desired speed.
#
Press M on the upper section of control
#
panel 1.
Adopting the limit speed shown in the driver
display
Activate Active Distance Assist DISTRONIC
#
or the variable limiter.
Press J.
#
The limit speed displayed in the driver display
is adopted as the stored speed. The vehicle
adapts its speed to that of the vehicle in
Advertisement
Table of Contents
