Light Bulb Replacement - Crosley GMD1060SW Use & Care Manual

Light Bulb Replacement

Cooktop Light
To replace the combination cooktop light/ night light:
1. Disconnect power at main fuse or circuit breaker or pull plug.
2. Remove screw on right side of light compartment cover and lower cover until it stops. (See
Figures 1 and 2.)
3. Gently unscrew the bulb(s). Be sure bulb(s) to be replaced are cool before removing.
4. Replace with a 30 watt appliance light bulb. High intensity 30-watt bulb(s) which are available
in supermarkets and hardware stores, may also be used for replacements.
5. Raise light compartment cover and replace screw.
6. Connect electrical power to microwave oven.
Oven Light
To replace oven light:
1. Disconnect power at main fuse or circuit breaker or pull plug.
2. Remove the top grill by taking out the 2 screws that hold it in place. (See Figures 3.)
3. Remove a screw (1) for lamp cover.(See Figure 4.)
4. Pull out the Lamp cover. (See Figure 4.)
5. Replace the light bulb with a 30-watt bulb.
6. Replace light housing to original position
7. Replace lamp cover and secure it with the screw (1 ).
8. Replace top grill and secure with screws.
9. Connect electrical power.
FIGURE 1
FIGURE 2
미국향 OTR_GMD1060SB(영)_CROSELY.indd 27
CARE AND CLEANING
FIGURE 3
FIGURE 4
27
2020-04-22 오후 10:14:27