SPECIAL FEATURES
Using the Vent Fan
You can control the 2-speed fan by touching the VENT FAN Pad.
1. Touch the VENT FAN Pad once for HIGH speed.
The Display will show "Hi".
2. Touch the VENT FAN Pad twice for LOW speed.
The Display will show "Lo".
3. Touch the VENT FAN Pad three times for turning vent fan off.
The Display will show "OFF".
To Set Fan to Run for a Specific Time:
1. Start fan by touching the VENT FAN Pad.
2. Touch the TIMER Pad and hold for 3 seconds. A beep will sound.
3. Touch appropriate number pads to set fan run time.
4. Press Start pad. Fan run time will appear in display and count down.
To Cancel Timer:
• Touch CANCEL/OFF Pad.
Note: Canceling the timer will cause the timer to shut off; however, canceling the timer will not
cancel the fan. The fan will continue to operate until turned off.
Using the Cooktop Light
You can control the light by touching the LIGHT Pad.
1. Touch the LIGHT Pad once to turn the cooktop light on.
The display will briefly show the word On.
2. Touch the LIGHT Pad twice to turn the light off.
The display will briefly show the word OFF.
Note: If there is no user input for 10 hours, cooktop light and vent fan will turn off automatically to
save energy.
24
미국향 OTR_GMD1060SB(영)_CROSELY.indd 24
2020-04-22 오후 10:14:27