Product Introduction The mini thermo detector use the unique detecting technology of non-contact infrared surface temperature of hu- man body, is used to detect the human body surface temperature through a high-precision temperature measure- ment sensor imported from Belgium. It has the function of voice warning of abnormal body temperature, which can effectively prevent large-scale disease infection, which can be used alone or widely integrated in walk through metal detector, ordinary doors, intelligent access control systems of temperature measurement, disinfection equipment and other equipment that needs to integrate temperature measurement functions.
Interface Specification • Temperature display: digital display show real-time detected temperature value. • Normal indicator: normal temperature indicator, the green light is on when the temperature is within the range of 35°C-37°C ( factory setting value ). • Abnormal indicator: abnormal temperature indicator, the red light is on when the temperature is not within the range of 35°C-37°C ( factory setting value ).
Page 4
Temperature Debugging Instruction 1. Press “Enter” button to the password input interface, press “Select” button to shift, press the “Adjustable” button to adjust the number, and the password is 1318. 2. Press “Enter” button to the interface of temperature alarm setting, press the “Select” button to shift and get into the interface of ambient temperature compensation factor setting.
Page 5
2. Press the adjustment key to enter the volume setting interface. Press the adjustment key to adjust the number. Press the selection key to switch to the reserved function item, the temperature unit selection item and the low temperature voice alarm switch item in turn. You can adjust the value by pressing the adjustment key. After the setting is completed, press the confirmation key to return to the main interface.
Note: need set ID number only when adding optional network(LAN) function. Installation Note 1. Install device in windless indoor, Cold wind could interfere thermo detection, we need turn up the ambient tem- perature compensation factor (5 °C each time) 2. Sunshine could interfere thermo detection. Thermo Detection Instruction 1.
Page 7
DISCLAIMER The infrared temperature measuring device is a human body surface temperature screening instrument. The test results only reflect the real-time temperature evaluation of objects or people in a specific environment. The selling company and the manufacturer shall not bear any responsibility for the direct or indirect loss caused by the use of the test results.
Page 8
802 Greenview Dr. Grand Prairie TX. 75050 USA Toll Free: 1-866-708-5401 Fax: (+1) 972-999-4113 sales@2MTechnology.net www.2mtechnology.net...