Fujitsu Plasmavision PDS4221 User Manual page 38

OTHER ADJUSTMENTS (OTHERS MENU) (Continued)
Eliminating Flicker (Vertical sync)
Corrects the vertical synchronization signal timing to eliminate vertical flicker.
Use or to specify a value between -2 and +1.
Adjusting Clamp Pulse (Clamp pulse)
Adjusts clamp pulse in accordance with the input signal received from connected
equipment.
Clamp pulse is automatically set at the optimal level when you do not use this option.
Use or to specify a value between 0 and 8.
Making White Areas Appear Even Whiter (Bluish white)
Makes on-screen white areas appear even whiter.
Each time you press or
sequence:
On Off
On: Enables this function.
Off: Disables this function.
Displaying System Status (Status)
Displays system operation status.
(1) Select "Status" and press
The "Status" information screen will appear.
(2) Check the status. Press
(3) Press to return to the OTHERS Menu screen.
M E N U
Mode: Input mode appears at the upper right corner of the screen.
Monitor No.: Monitor number
Frequency: Frequency and polarity (fH, fV) (
Speaker: Speaker type
Freq. scan: Frequency scanning (
Video mode: Video mode (
Input signal: Signal type
Preset No.: RGB parameter number (
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode,
V S
E-36
, one of the available choices appears in the following
or .
E N T E R
when you wish to update the status.
E N T E R
, ,
C R1 R2
, )
R1 R2
, only)
V S
, only)
R1 R2
: Comp.video mode, : RGB1 mode,
C R1
C R1 R2
C R1 R2
V S
V S C R1 R2
)
: RGB2 mode
R2
"Status" information screen (Video Input
Mode)
"Status" information screen (RGB Input
Mode)