Fujitsu Plasmavision PDS4221 User Manual page 37

Setting Display Information (OSD)
You can use this option to select whether to display information other than menus.
(Error messages are displayed regardless of what choice you make for this option.)
Each time you press or
sequence:
On Off
On: Displays all information.
Off: Displays only menus and error messages.
Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select "Language" and press
The "Language" selection screen will appear.
(2) Press or to select your desired language.
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
(3) Press .
E N T E R
The menu is displayed in the selected language.
(4) Press when you finish to return to the OTHERS Menu screen.
M E N U
Assigning Numbers to Displays (Monitor No.)
When you use two or more displays, you can use a single remote control to control
individual displays by assigning a unique number to each of the displays.
Each time you press or
sequence:
0 1 2
0: You can normally control displays.
You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].
1– 4: Allows you to control a desired display by pressing the corresponding button
(one of [SHIFT 1] through [SHIFT 4]).
When you do not press any of the SHIFT buttons, you can control all displays.
* You can check the "Monitor No." on the Status screen. (See P. E-36.)
Selecting Video Mode (Video mode)
You can use this option to select the desired video mode of images it will receive.
Each time you press or , one of the available modes appears in the following sequence:
Auto NTSC
Auto: Automatically selects the video system.
Other than Auto: You need to select a system appropriate to the input signal.
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode,
V S
, one of the available choices appears in the following
or .
E N T E R
, one of the available numbers appears in the following
3 4
PAL SECAM N-PAL
: Comp.video mode, : RGB1 mode,
C R1
All modes
All modes
"Language" selection screen
All modes
V S
M-PAL 4.43NTSC
: RGB2 mode
R2
ñ
ç
ê
E-35