(2) Check the connection to see whether correct "type" is selected. It's normal to choose login type of
PPPoE. When you use PPPoE to login, the following information should be provided: VPI and
VCI, which can be queried from your ISP, user name and password.
(3) Then make sure that "using NAT" and "default gateway" have been selected with a tick. Check
whether "connect on demand" has been selected with a tick. If it is selected, the connection is
activated only when traffic to outer networks arrives. If not selected, check "keep connection",
which should be set to 0 if you demand to keep connection
Make sure that the above parameters are saved after configuration. Internet is now available since the
configuration is properly done.
ANNEX:SHIPPING LIST
ADSL MODEM
User Manual
Power Supply
Cable Cat5 RJ45
Telephone Line
Warranty Certificate
×1
×1
×1
×1
×2
×1
Page 23
DSL Gateway/Router — User Manual
Total 24 Pages