Bosch GBH Professional 36 V-LI Plus Original Instructions Manual page 17

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless quick-change chuck (GBH 36 VF-LI Plus)
(2) SDS plus quick-change chuck (GBH 36 VF-LI Plus)
Technical Data
Rotary hammer
Article number
Speed control
Stop rotation
Clockwise/anticlockwise rotation
Quick-change chuck
Rated voltage
Rated power input
A)
Impact rate
Bosch Power Tools
(3) SDS plus tool holder
(4) Dust protection cap
(5) Locking sleeve
(6) Locking ring for quick-change chuck (GBH 36 VF-
LI Plus)
(7) Vibration damping
(8) Rotational direction switch
(9) EPC switch (Electronic Precision Control)
(10) Rechargeable battery release button
(11) Button for rechargeable battery charge indicator
(12) Temperature monitoring indicator
(13) Handle (insulated gripping surface)
(14) On/off switch
(15) Rechargeable battery
(16) Release button for impact/mode selector switch
(17) Impact/mode selector switch
(18) Worklight
(19) Button for depth stop adjustment
(20) Auxiliary handle (insulated gripping surface)
(21) Depth stop
(22) Securing screw for keyed chuck (GBH 36 V-
a)
LI Plus)
(23) Keyed chuck (GBH 36 V-LI Plus)
(24) SDS plus shank for drill chuck (GBH 36 V-LI Plus)
(25) Drill chuck holder (GBH 36 VF-LI Plus)
(26) Identification grooves
(27) Chuck key (GBH 36 V-LI Plus)
(28) Front sleeve of the keyless quick-change chuck
(GBH 36 VF-LI Plus)
(29) Retaining ring of the keyless quick-change chuck
(GBH 36 VF-LI Plus)
(30) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GBH 36 V-LI Plus
3 611 J06 0..
V=
W 600
-1
min 0–4200
English | 17
a)
a)
a)
a)
GBH 36 VF-LI Plus
3 611 J07 0..
●
●
●
−
36 36
600
0–4200
1 609 92A 70H | (21.12.2021)
a)
●
●
●
●