Cisco DPC3949 User Manual page 32

Chapter 2 Installing the EuroDOC SIS W ireless Residential Gateway with Voice
Select an Appropriate Place to Mount the Wireless Residential Voice Gateway
You may mount the residential gateway to a wall that is made of cement, wood, or
drywall. When choosing an appropriate mounting place, refer to the following
recommendations:
Ensure that the mounting location is free of obstructions on all sides, and the

cables should be able to easily reach the residential gateway without strain.
Leave sufficient clearance between the bottom of the residential gateway and any

flooring or shelving underneath to allow access to cabling.
Allow enough slack in all cables so that the residential gateway can be removed

for any required maintenance without disconnecting the cables.
Choose a location that allows adequate ventilation around the residential

gateway.
Equipment Needed
Verify that you have the following items that you will need to mount the residential
gateway:
Two wall anchors for #8 x 1-inch screws

Two #8 x 1-inch pan head sheet metal screws

Drill with a 3/16-in. (4.8 mm) wood or masonry bit, as appropriate for the wall

composition
A copy of the wall-mounting slots illustration shown on the following pages

Position the Wireless Residential Gateway
Use the following illustrations to guide you in positioning the residential gateway on
the wall.
15 TP-00115