Fujitsu M3099EH Brochure & Specs page 2

Better Paper Handling For
Greater Convenience
The M3099EH/GH and the M3099EX/GX were
designed to streamline even the busiest document
imaging environments. Among the six features
designed to optimize the scanning process are a pre-
picking function that prepares the next document
for reading while the current document is scanned;
an input hopper and exit tray that hold up to 1,000
sheets, allowing you to load more documents for
unattended scanning; three built-in page counters
that make it easy to monitor scanned batches and
the life of your consumables; a double-feed
detection capability that eliminates missed images by
alerting you if more than one sheet is pulled through
the scanner at a time; an automatic end-of-page
detector that extinguishes extra white space when
scanning mixed-length batches; and an optional field-
installable post-scan ink endorser that ensures
every document scans successfully by marking each
document as it scans.
ScanRight ™ Technology Makes It Better
Standard on all M3099 scanners, Fujitsu's ScanRight
image processing technology delivers unparalleled
image quality while maintaining the scanner's high
throughput.
ScanRight enables advanced imaging features such
as Automatic Separation allowing documents with
text and photos to be scanned in a single pass;
M3099 Series Specifications
M3099EH/GH
Description
Technology CCD (charge-coupled device) image sensor
200, 240, 300, 400 dpi (user selectable)
Resolutions
Dither, error diffusion
Halftone patterns
Scanning speed
Simplex 85 pages per minute
Duplex 130 images per minute
Automatic document feeder (ADF)
Document feeding mode
and manual feeder
Hopper capacity 1,000 sheets
Document size
2.5 in. x 3 in.
Minimum
8.5 in. x 14 in. (legal)
Maximum
Interfaces EH: RS-232/video
GH: SCSI-II
EH: Available via third-party video
Compression
controller board
GH: Group 3 and Group 4
Image type output Binary; 64-step dither; error diffusion
Red lamp (user installable)
Options
Post-scan ink endorser (field installable)
ScanCare Program
Priority Service
Power requirements 100-120 VAC, 50/60Hz
200-240 VAC, 50/60Hz
Operating environment
41°F – 95°F (5°C – 35°C)
Temperature
Relative humidity 20%-80% (non-condensing)
Power consumption 0.25K VA
24 in. x 26.8 in. x 20.9 in.
Dimensions (HxWxD)
Weight Less than 143 lbs.
1 year on-site
Limited Warranty
© 1999 Fujitsu Computer Products of America, Inc. All rights reserved. The statements in
this publication are not intended to create any warranty, expressed or implied. Fujitsu
Computer Products reserves the right to change equipment and performance specifications
stated herein without notice. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu
Limited. ScanRight is a trademark and ScanCare is a service mark of Fujitsu Computer
Products of America, Inc. The TWAIN logo is a registered trademark of the TWAIN Working
Group. All other trademarks mentioned herein are the property of their respective owners.
Printed in the U.S.A. Qty 10M P/N DS20100299
Dynamic Thresholding to automatically adjust
contrast levels in documents that contain
handwritten or typed characters; Noise Removal to
remove particles on copied or faxed documents;
Ball Point Pen Mode which compensates for
varying reflective light characteristics of ink and
much more. And now with the M3099EH/GH and
M3099EX/GX scanners, these image processing
functions are preset and accessible through the user-
friendly backlit operator panel providing optimum
image quality.
Maximizes Your Up-Time
Fujitsu backs each M3099 series scanner with a
one-year on-site warranty. It's our commitment to
providing you the ultimate in performance, reliability
and service. Also available during the warranty and
post-warranty period is ScanCare
leading full preventative maintenance program to
keep your scanner operating at peak performance.
With every ScanCare and ScanCare Plus purchase,
you receive Priority Service* at no additional cost.
Priority Service may also be purchased separately as
an upgrade to the existing standard one-year on-site
product warranty or as a post-warranty service
contract. Call (800) 626-4686 for further details
about ScanCare and Priority Service. Finally, to
make sure that downtime is kept to a minimum,
every M3099 series scanner comes with one free
cleaning kit and one free consumables kit.
About Fujitsu Computer Products
M3099EX/GX
CCD (charge-coupled device) image sensor
200, 240, 300, 400 dpi (user selectable)
Dither, error diffusion
65 pages per minute
110 images per minute
Automatic document feeder (ADF)
and manual feeder
1,000 sheets
2.5 in. x 3 in.
11 in. x 17 in. (double letter)
EX: RS-232/video
GX: SCSI-II
EX: Available via third-party video
controller board
GX: Group 3 and Group 4
Binary; 64-step dither; error diffusion
Red lamp (user installable)
Post-scan ink endorser (field installable)
ScanCare Program
Priority Service
100-120 VAC, 50/60Hz
200-240 VAC, 50/60Hz
41°F – 95°F (5°C – 35°C)
20%-80% (non-condensing)
0.25K VA
24 in. x 26.8 in. x 20.9 in.
Less than 143 lbs.
1 year on-site
SM , the industry's
of America
Fujitsu Computer Products of
America is a wholly owned
subsidiary of Fujitsu Limited,
one of the world's largest
computer companies with
$37.7 billion in worldwide
revenue. Benefiting from
Fujitsu Limited's $3 billion
annual investment in research
and development, Fujitsu
Computer Products provides
innovative solutions for the
U.S. marketplace. Current
product offerings include: high
performance hard disk drives,
tape drives, magneto-optical
drives, high volume scanners,
and printers.
*Available in select cities only. Call (800)
626-4686 for further details.
FUJITSU COMPUTER PRODUCTS
OF AMERICA, INC.
2904 Orchard Parkway
San Jose, CA 95134-2009
(800) 626-4686
(408) 432-6333
Web site: http://www.fcpa.com
Email: info@fcpa.fujitsu.com