Maintenance & Cleaning - Mistral MWM710FL Instruction Manual

Maintenance and Cleaning
Cleaning the drawer housing
Use a bottle brush to remove detergent residues inside the
drawer housing.
Cleaning the water inlet filter
Use pointed nose pliers to withdraw the plastic filter.
Clean, put back secure. These filter should be checked
every 6 months or so, or more often if there are frequent
interruptions to the water supply.
The filter must be put back in place after cleaning.
1 Disconnect the machine
from the mains electricity
supply and open the
lower cover with a
screwdriver.
Important:
If the machine is exposed to temperatures below 0°C, certain precautionsshould be taken.
The filter should be cleaned every 2 months or when there is fault that the "
screen.
2 Place a container
under the pump.
Unscrew and remove
the filter.
16
3 Clean the filter carefully
" is on the