How To Use - Mistral MWM710FL Instruction Manual

How to use washer
Before washing clothes for the first time, you must run a complete cycle without clothes. To do these:
1. Connect the power and turn on the tap.
2.Press the button "
" .
3. Press the button "Start/Pause" .
It can remove the water out which left in the tub because of manufacturer's checking out.
Washing preparation
1.Connect the inlet hose well and turn on the tap.
2.After making sure the power socket is grounded reliably, insert the power plug into the power socket.
3.Place the drain hose well.
Preparation of clothes
1. Sort the laundry by color and by care label. Most garments have a
textile care label in the collar or side seam.
2. Make sure all the pockets are empty, Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage to garments and components in the
machine.
3. Close any zips, fasten hooks and eyes etc before washing.
4. Dark textiles often contain excess dye and should be washed separately
several times before being included in a mixed load. Always wash whites
and coloureds separately.
5. Badly soiled areas, stains etc. should be pre-treated with liquid detergent,
stain removers etc.
6. Turn over the clothes which pill easily and is with woolen surface before
putting them into the machine.
Put clothes into the washer
Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better wash
results and also helps distribute the load evenly during spinning. The most efficient use of energy and
water is achieved when a full load is washed. However, do not overload as this causes creases and
reduces cleaning efficiency.
Make sure that no garments are nipped between the door
and the seal.
Use process
" to turn on the machine and choose the program " 20℃
13
Diagram 1
Diagram 2
Diagram 3