Page 1
Washing Machine Instruction Manual Model No. MWM710FL...
Page 2
Thank you. Thank you for choosing a quality Mistral appliance. Mistral prides itself on‘affordable living making sure there is no compromise in your favourite room..The Kitchen. This product comes with a 2 Year in home warranty, be sure to retain your user manual and receipt.
Safety Instructions Your safety is of the utmost importance to our company. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Consumer service support hotline. WARNING Read and understand thoroughly these safety instructions before use.
Page 5
If the connection cable is damaged or broken, it must only be replaced by an approved service technician to protect the user from danger. Faulty components must only be replaced by genuine manufacturer original spare parts. Only when these parts are fitted the safety standards of the machine can be guaranteed. THIS WASHING MACHINE MUST BE EARTHED.
Parts and Features Before Use Drawer(for detergent Top Cover or fabric softener) Control Panel Cabinet Door glass Gasket Door Drain Hose Drain pump cover Adjustable Feet Drain pump filter Unscrew the drain pump filter to let water run out when the machine is not used for a long time.
Installation: Before Use Backout packing • Remove all the packing(including the foam base) or the vibration and noise may occur. • Dispose all the wrappage safety and keep them out of the reach of children. Danger of suffocation! • It is normal that water drops appear on the packing plastic bag and the door glass, which are resulted from the water left in the tub for checking out.
Page 8
Installation: Use process Installation place requirement •A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or carpeted surface. •The machine must be level and securely positioned. The distance between the machine and wall must be more than 10 cm .
Page 9
Installation: Use process 2. Connected securely to a standpipe Firstly form a hook in the end of the drain hose using the “U” piece supplied. Place the drain hose into your standpipe, which should have an internal diameter of approximately 30mm thus ensuring there is an air break between the drain hose and standpipe.
Page 10
Control Panel Use process Synthetics Mixed Temp Rinse+ Delicates/ Super Quick silk Delay 20℃ Drum Clean Eco 40-60 Program Speed Rinse+Spin Anti-Allergy Spin Press for 3" to reload Programmes: Page 9 Display: Page 7 Buttons: Page 8 Digital display: This icon shows the time, speed, rinse times, Error codes. Display The display shows the current settings, options or relevant information.
Page 11
Control Panel Use process Buttons The following is the instruction of the buttons and their setting options. 1. Power ( Press this button to turn the machine on or off. Start/pause ( Press this button to start or pause a wash cycle. To reload the laundry during a wash cycle, press this button for 3 seconds, and the machine will drain if the water level is too high.
Page 12
Control Panel Use process Programs Options and functions for programs Max Spin Max Temp Washing Program Max.Load Type of Wash and speed(rpm) (℃) Symbol Recommendations Lightly to normally soiled robust laundry made of cotton, linen, artificial fibers and their blends. Mixed Only wash similar colors together in one wash load.
How to use washer Use process Before washing clothes for the first time, you must run a complete cycle without clothes. To do these: Connect the power and turn on the tap. 2.Press the button “ ” to turn on the machine and choose the program “ 20℃ ”...
Page 14
How to use washer Use process Using the detergent drawer 1. Open the drawer and add adequate detergent into main wash compartment marked “ ” or “ ”. 2. Add the fabric softener into compartment marked “ ” or “ ”...
Page 15
How to use washer Use process Door lock When the machine is started , the door lock is locked When the temperature inside the durm is above 60℃, the door lock is locked. When the water is above a certain level, the door lock is locked. When the washing cycle is finished, the door lock is unlocked.
Maintenance and Cleaning Cleaning the drawer housing Use a bottle brush to remove detergent residues inside the drawer housing. Cleaning the water inlet filter Use pointed nose pliers to withdraw the plastic filter. Clean, put back secure. These filter should be checked every 6 months or so, or more often if there are frequent interruptions to the water supply.
Troubleshooting Guide Problem Error Code Possible Cause 1. Water tap is not open. 1. Open the water tap. The water of 2. Drain hose is put down. 2. Hook up the hose. machine fills 3. Water inlet valve is damaged. 3.
Parameters Model MWM710FL Power 220-240V~,50Hz Rated Power 2100W 0.02-0.8Mpa Water Pressure Net Weight /Gross Weight 52kg/56kg Outer dimension (WxDxH)mm 595x410x845 Energy-efficient test program entrance guide: Choose the program “ Eco 40-60 ”, select the temperature to 60 ℃ and rinse times to 3 times.
Electric Diagram Filter S1-1 Earth lock S1-4 close coil S1-3 5V GND S1-2 TO MCU Hot Valve Pre Valve Main Valve L’ L’ TO MCU Motor Display Board TO MCU Water Sensor Main Board This symbol on the product, or in its packaging. indicates that this product may not be treated as household waste.
(De fe c t) the n the C o mp a ny will, a t its o p tio n, re p a ir the Mistral p ro d uc t m a y d iffe r fro m the o rig ina l p ro d uc t p urc ha se d b y the C o nsum e r.
Page 21
T he Austra lia n c o nsume r la w re q uire s the fo llo wing sta te me nt with this p ro d uc t Our g o o ds c o m e with g uarante e d that c anno t b e e xc lude d unde r the Australian C o nsum e r Law. Yo u are e ntitle d to a re plac e me nt o r re fund fo r a majo r failure and fo r c o m pe nsatio n fo r any o the r re aso nab ly fo re se e ab le lo ss o r dam ag e .
Need help?
Do you have a question about the MWM710FL and is the answer not in the manual?
Questions and answers