Table of Contents
Advertisement
Safety Instructions
General
This product is for indoor use only.
Read all of these instructions. Save them for future reference.
Follow all warnings and instructions marked on the device.
Do not place the device on any unstable surface (cart, stand, table,
etc.). If the device falls, serious damage will result.
Do not use the device near water.
Do not place the device near, or over, radiators or heat registers.
The device cabinet is provided with slots and openings to allow
for adequate ventilation. To ensure reliable operation, and to
protect against overheating, these openings must never be blocked
or covered.
The device should never be placed on a soft surface (bed, sofa, rug,
etc.) as this will block its ventilation openings. Likewise, the device
should not be placed in a built in enclosure unless adequate
ventilation has been provided.
Never spill liquid of any kind on the device.
Unplug the device from the wall outlet before cleaning. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
The device should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of
power available, consult your dealer or local power company.
The device is designed for IT power distribution systems with 230V
phase-to-phase voltage.
To prevent damage to your installation it is important that all
devices are properly grounded.
The device is equipped with a 3-wire grounding type plug. This
is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsol ete outlet.
Do not attempt to defeat the purpose of the grounding-type plug.
Always follow your local/national wiring codes.
Do not allow anything to rest on the power cord or cables. Route
the power cord and cables so that they cannot be stepped on or
trip ped over.
Appendix
51
Advertisement
Table of Contents
