Cooler Master StreamEnjin User Manual page 12

StreamEnjin User Manual
No. Component
7 MIC
8 L/R
9 Mute
Video Section (controls the video settings of the system)
10 Scenes Selector
Transition Control Section (switches the current stream (PGM) scene to the preview
(PRV) stream and vice versa)
11 Auto (transition)
12 Cut (transition)
13 T-Bar (transition)
14 iPad Stand
15 SRC / PGM View
Selector
16 Pause Stream
17 GoLive
4
Description
Switches to the MIC audio source.
The button will light up when switched to this source.
Switches to the RCA Line In audio source.
The button will light up when switched to this source.
Mutes/unmutes the audio the system is currently tuned
into.
When muting source 1 or 2, AFV will also be turned off.
Selects the current stream (PGM) scene and the preview
(PRV) scene.
Greenly lit button indicates PRV Preview.
Redly lit button indicates PGM Preview.
Pressing the Auto button will begin the transition after
a specified time (0.3-3.0 seconds).
Go to the Setting Deck and refer to page 36 on how to
modify this specified time.
Press and hold for 3 seconds to enter Quick Mode. Refer
to Quick Mode on page 44 for more information.
The transition happens immediately when you press the
Cut button.
Press and hold for 3 seconds to enter Quick Mode. Refer
to Quick Mode on page 44 for more information.
Slide the T-Bar to start the transition. The scene
transition speed depends on how fast you slide the bar.
Sliding the T-bar all the way to one end will complete the
transition.
You can create different effects by sliding it slowly, quickly
or even hold it half way.
Allows the iPad to sit in.
Pressing the button will switch video source between
HDMI source 1, HDMI source 2 and PGM.
Press this button to pause streaming.
Press this button to start streaming.
Press again to stop.