External Memory (Usb Stick) - NUVE FR 290 User Manual

value getting smaller, a more detailed graph appears.

6.1.3.2. EXTERNAL MEMORY (USB STICK)

USB Stick is connected to USP port-1 of the communication unit (Figure 2). "
the operating mode screen when the USB stick is identified by the microprocessor system.

If does not appear on the screen, USB stick may be defective or may not be
connected correctly.
When "USB Stick" submenu is selected on the memory page, there are three options: "Copy
History", "Instant Record" and "Copy Failure History".
Copy History: As USB stick is connected to the device, all data in the internal memory is
transferred to USB stick when "Copy History" is selected. When loading bar shows 100%, push
the enter key (F4) to exit the page.
Instant Record: As USB stick is connected to the
freezer, the page on the right appears when
"Instant Record" is selected. The period of the
record time can be selected by using the value
increase (F1) and decrease (F2) keys. As soon as
the enter key (F4) is pushed, recording starts
and the display returns the main page. If you
want to exit this page without starting to
record, push the backspace key (F3). You can
remove USB stick when you want to finish the
record process.
Copy Failure History: As USB stick is connected to the device, all error history in the internal
memory is transferred to USB stick when "Copy Failure History" is selected. When loading is
finished completely, push the enter key (F4) to exit from this page.
The page on the left appears when the settings
key (F1) is pushed on the graph page.
Temperature axis (y-axis) can be adjusted on
this page. Working temperature determines the
midpoint of the temperature axis. The working
temperature value should be close to the set
temperature value for more comfortable
observation. Sensitivity value is the difference
between two values on the y-axis. As sensitivity
18
" appears on