Handling And Transportation; Unpacking; Mains Supply; Positioning - NUVE FR 290 User Manual

5.2.

HANDLING AND TRANSPORTATION

All handling and transportation must be carried out by using proper equipment and experienced
staff. The instrument must be supported underneath, never be turned upside down and always
be moved in the vertical position.
5.3.

UNPACKING

Remove the cardboard box packing and the second nylon wrapping around the instrument.
Ensure that no damage has occurred during transport. The below mentioned are provided with
the instrument, please check them;
 1 ea. user's manual and warranty
 1 ea. power switch key
 2 ea. door handle key
 1 ea. connector
5.4.

MAINS SUPPLY

The instrument requires 230 V, 50 Hz.
Please make sure that the supplied mains matches the required power ratings which are written
on the name plate of the instrument located at the back of the instrument.
Always plug-in the instrument to correctly grounded sockets.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of isolation fault.
5.5.

POSITIONING

 Check that the positioning is suitable for users.
 Check that the instrument is stable on its four wheels.
 Check that the user will be able to follow up the operation even when he deals with
something else.
 Check that the positioning of the device prevents interference with other equipment in the
near surrounding.
 Ensure that the instrument is not exposed to direct sunlight.
 Leave at least 30 cm free space between the device and the wall and other equipment due
to ventilation of compressor.
10