Page 1
VE R SI ON 1 . 3 Comp Mount Installation Manual...
Page 2
This guide provides instructions for installing Zep Solar’s Comp Mount flashed attachment assembly. The Comp Mount is an OEM product manufactured by Quick Mount PV exclusively for Zep Solar. It is intended for use on composition shingle roofs and combines high-quality waterproofing with a labor-saving installation method.
Page 3
Moving up roof, to determine the location of the next Comp Mount, measure off the lower edge of the lower Comp Mount to one of the 2 threaded holes on the upper Comp Mount (Fig 6). See Mechanical Specifications below for threaded-hole loca- tions.