1. Manuals
  2. Brands
  3. ZEP SOLAR Manuals
  4. Racks & Stands
  5. ZS Span
  6. Installation manual

ZEP SOLAR ZS Span Installation Manual

Rail-based applications
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ZS Span™
Installation Manual for Rail-Based Applications - U.S.
Document #800-0329-001 Rev F
File Generated July 3, 2013

Advertisement

Table of Contents
loading

Related Manuals for ZEP SOLAR ZS Span

Summary of Contents for ZEP SOLAR ZS Span

  • Page 1 ZS Span™ Installation Manual for Rail-Based Applications - U.S. Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 2 Copyright © 2012, 2013 by Zep Solar, Inc. All rights reserved. ZEP™, ZS Comp™, ZS Aero™, ZS Seam™, ZS Trap™, ZS Wave™, ZS Span™, ZS Tile™, and the Zep logo are trademarks of Zep Solar, Inc. Zep Solar® is a registered trademark of Zep Solar, Inc. All other trademarks are the property of their respective owners.

  • Page 3: Table Of Contents

    Step 6: Install First Row of Modules..........................47 Special Inset: Interlocks..............................53 Special Inset: Wire Management ..........................55 © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page i...
  • Page 4 Array Skirts and Caps ..........................78 Regulatory Information _______________________________________________ 79 UL and ETL Listings................................79 © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 5: Introduction

    Introduction ZS Span™, from Zep Solar, Inc., is an integrated roof mounting solution for installing PV arrays on tile roofs. ZS Span offers the following benefits: rapid installation, reduced roof penetrations, reduced parts count, low sys- tem weight, precision alignment, enhanced aesthetics, resistance to theft, redundant auto-grounding hardware, portrait and landscape options, and an easy-to-use design tool with array-level BOM calculations.

  • Page 6: General Safety Precautions

    Ground Zep and a suitable earth ground. The ground wire and torque specs are identified in “Ground the Array” on page 58. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 7: Zep Compatible

    Each Tongue provides an in/out adjustability with the Zep Groove, allow- is inserted into the Zep Groove. ing for optimized placement of each module. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 8 (tested for both anodized and painted coatings) on the Zep Groove. Note: All components shown as UL Listed to UL 2703 are listed for bonding. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 9: Zs Span Components

    T-Lock Array Skirt Interlock Adjustable Mighty Hook Corner Cap © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 5...

  • Page 10: Zs Span Core Components

    Listed by UL to UL 467 and UL 2703. ETL listing conforms to UL STD 467. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 11 Creates electrical bond between Spanner Bars when fully spliced together. Two Splices per join. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 12: Zs Span Accessory Components

    Zep Solar hardware components. See “Installation Process” on page 33 for details. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 13 Zep Compatible PV module frame. UL Listed to UL 2703. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 14: Zs Span Tools

    • Secure Cam Foot base in Spanner Bar groove • Remove Interlock from between two modules © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 15: Array Design

    The Zepulator online design tool and Span Tables are available on the Zep Solar web site to enable custom array designs. Additional information on fine-tuning array designs can be found in training videos, also available on the Zep Solar web site.

  • Page 16: Step 2: Obtain Spacing And Cantilever Allowances

    Zep Solar, Inc., and also view the online videos available on the Zep Solar web site at www.zepsolar.com © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 17: Step 3: Create Array Layout And Bill Of Material

    Zepulator does not include hardware pricing, since that may depend on the distribution channel and other factors. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 18: Using The Zepulator Online Design Tool

    Bill of Material and spacing Engineering Calculations. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 19 The Zepulator does not show Hybrid Interlocks on the layout, although it will include Hybrid Interlocks in Additional Truck Stock to ensure adequate hard- ware supply if needed. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 20: Using The Span Tables

    (up the rafter), shown in increments of 2, 3, and 4 Tile Reveals, assuming a 14- inch reveal. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 21: Alternative Layout Possibilities

    Installers who need additional support are encouraged to contact Zep Solar Support for design assistance. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 22 ZS S P A N I N S T A L L A TI O N M A N U A L F O R R A I L -B A S E D A P P L I C A T I O N S - U . S . © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved.

  • Page 23: Layout Concepts

    Drop-in direction is horizontal (East-West) Portrait Landscape Array Skirt © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 19...

  • Page 24: Engineering Rules

    East-West drop-in. For Spanner Bars running East-West, the maximum module cantile- ver is 1/3 of the maximum allowable North-South Spanner Bar spacing. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 25 North-South Tile Hook spac- ing but never greater than 24 inches. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 26 Tile Hooks) is 1/2 of the maximum allow- able East-West Tile Hook spacing, but never greater than 24 inches. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 27 Tongue and Groove facing along the drop-in direction. Cam Feet should never be installed along the drop-in direction. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 28 Drop-in direction Cam Foot Interlock Array Skirt Correct Incorrect © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 24...

  • Page 29: Grounding/Earthing

    In some situations, portions of the array may require additional bonding connections. The illustra- tions on the following pages show when additional Equipment Ground Conductors or jumpers are required. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 30 Ground Zep on either side of the column and a copper conductor wire between the two, in order to bond the two electrically isolated sub-arrays. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...

  • Page 31: Thermal Expansion

    Array sizes larger than approximately 33 feet in either direction. • After two consecutive Thermal Expansion Joints, a physical gap is required. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 32 Ground Zep Equipment Grounding Conductor (EGC) Bond path Array Skirt © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 28...
  • Page 33 Figure 4.13 East-West Drop-In, Thermal Expansion Gap Physical gap recommended minimum 12 inches © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 34: Roof Zones

    Note: The examples shown in this document are for illustration purposes only and are subject to change in accordance with any modifications to regional engineering and structural requirements. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 35 Certification Letter and Span Tables document that is appropriate for the project location. This document is available on the Zep Solar web site. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 36 ZS S P A N I N S T A L L A TI O N M A N U A L F O R R A I L -B A S E D A P P L I C A T I O N S - U . S . © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved.

  • Page 37: Installation Process

    Installation Process ZS Span for Tile Roofs Mounting Solution for Solar Arrays © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 38: Step 1: Mark Out Array Layout On Roof

    Cam Foot Spanner Bar PV Module Module length + 1/2 inch © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 39: Step 2: Install Roof Attachments

    Replace Roof Tiles Tiles may require grinding in order to fit flush. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 40: Step 3: Ground Prep

    1/2” gap OK Spanner Bars should be flush when fully spliced, tolerance of +/- 1/4”. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 41 1.25” distance Closed position Tighten Cam Foot base 100 degrees, using Flat Tool. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 42 Top Mount or Side Top Mount Tile Mount Tile Hook Hook only © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 43: Special Inset: Spanner Bar 1X 3X 4X Lengths

    2 module widths. Too short © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 44: Step 4: Attach Spanner Bars

    Rockit, on the two outermost Cam Cam Feet threaded studs meet string line. Feet. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 45 Spin the Rockit to adjust Cam Foot height up or down Allowable range is as shown. within the allowable range. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 46: Step 5: Install Array Skirt

    NOTE: edge. See “Interlocks” on page 53 for more information. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 42...
  • Page 47 Simultaneously tighten Interlock to Position 3 (closed) while rotating next section of Array Skirt into place on the first-column Cam Feet. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 48 *For previous Cam Foot version, Part No. 850-1284, use the left side of the Rockit. Please see “Grip Installation” on page 46 for additional installation notes. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 49 End Caps or Corner Caps. See “Array Skirt Options” on page 65 for more information. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 50: Special Inset: Grip Installation

    Slide in from the right Slide in from the left Part No. 850-1421 © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 51: Step 6: Install First Row Of Modules

    Cam Feet and Interlocks. towards Cam Feet to seat the module completely. Frame engages at 15 degrees. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 52 Zep Groove of the module frame. Fully seated Interlock module © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 48...
  • Page 53 Gap between modules should be consistent at the and re-seat modules until row is straight. upper and lower edge of each module. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 54 Connect DC leads and clip wires to module frame using the AC/DC Cable Clip, the DC Wire Clip, or other Zep Solar-approved solution. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 55 Tighten Cam Foot base 100 degrees using Flat Tool. Note positioning of correctly tightened Cam Foot base. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 56 See “Array Skirt Options” on page 65 for more information. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 57: Special Inset: Interlocks

    Note: If the Key side of an Interlock Zep is visible, the Interlock is positioned too far to one side. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 58 An over-turned Interlock Zep will interfere with the drop-in of the next NOTE: row of modules. Flats should be facing up, not the points. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 59: Special Inset: Wire Management

    DC Wire Clip Release AC/DC Cable Clip DC Wire Clip © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 55...
  • Page 60 Please contact Zep Solar Support for more information on wire NOTE: management solutions and approaches. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 61: Step 7: Complete The Array

    65 describes the various configurations that are available, and “Installing Side Skirt and Corner Caps” on page 59 contains installation details. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 62: Step 8: Ground The Array

    25 and “Thermal Expansion” on page 27 for more information. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 63: Special Inset: Installing Side Skirt And Corner Caps

    ). Then snap the Array secure the Array Skirt. Skirt onto the T-Lock from the other side © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 64 Corner Cap, Outside Corner Cap, and End Cap. Array Skirt © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 65 See “Bottom Skirt Option” on page 67 for more information. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 66: Special Inset: Universal Box Brackets And Other Accessories

    Tongue side Rockit part No. 850-1258 Universal Box Bracket (example) © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 62...

  • Page 67: Installation Supplement

    4. Detach Cam Foot base and remove Cam Foot from module frame. 5. Remove the first module. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 68 Flat Tool if needed. For easier Interlock removal, hold modules up to keep them from sagging. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 69: Array Skirt Options

    Array Skirt is produced, approximately 1.25” . © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 70 After the first column of modules is fully secured, leveled, and aligned, the installer may choose to remove the Array Skirt subsequent to completing the installation. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 71 59 for installation details. Outside Corner Cap Part No. 850-1386 © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...

  • Page 72: Removing The First-Row Array Skirt

    Slide in Apply screwdriver to one side of position notch for leverage. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 73 4. The Interlocks are revealed with the Key side showing. Key side (Flat Tool) © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 74 6. Re-install and secure the Interlock with the Key side facing inwards. Key side Tongue side © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 75: Hybrid Interlocks

    Hybrid Interlock is available in selected regions, and the bonding Hybrid Interlock does create a bonding path across modules.) © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 76 Keep the center of each Rockit minimum 2 inches from module corner. Hybrid Interlock to the PV module frame or Array Skirt. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 77: Backwards Compatibility

    This section contains important information regarding inter-operability among components. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...

  • Page 78: Special Inset: Component Versioning

    Part No. 850-1143 (Bar Sleeve) Part No. 850-1401 (Splice Kit now separate) © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013...
  • Page 79 Part No. 850-1421 * Please contact Zep Solar Support for a complete list of associated SKUS for each Array Skirt profile. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...

  • Page 80: Special Inset: Interlock Versions And Alignment Marks

    Current Version 1/2” gap between modules Part No. 850-1388 range © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F File Generated July 3, 2013 Page 76...

  • Page 81: Special Inset: Array Skirt Version Compatibility

    Part No. 850-1296 between the Interlock and the Array Skirt when connecting Array Skirt sections together. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...

  • Page 82: Special Inset: Array Skirts And Caps

    Part No. 850-1215 * Please contact Zep Solar Support for a complete list of SKUS for each Array Skirt profile. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...

  • Page 83: Regulatory Information

    Canadian Standards Association (CSA) - These items appear as “Certified to ULC ORD STD…” or “Certified to CSA STD…” © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com Document #800-0329-001 Rev F...
  • Page 84 SKU. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 85 SKU. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 86 SKU. © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved. www.zepsolar.com...
  • Page 87 ZS S P A N I N S T A L L A TI O N M A N U A L F O R R A I L -B A S E D A P P L I C A T I O N S - U . S . © 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved.
  • Page 88 Zep Solar, Inc. www.zepsolar.com 161 Mitchell Blvd., Suite 104 P (415) 479-6900 San Rafael, CA 94903 F (415) 479-6901...

Table of Contents