Advertisement
SEVERE WARNING
WARNING
SIGNS FOR
INSTALLATION
• Do not install the freezer
in a damp place or place
where it may come in
contact with water.
- Deteriorated insulation of
electrical parts may cause an
electric shock or fire.
• Do not place this freezer in
direct sunlight or expose to
the heat from stoves, room
heaters or other appliance.
• Never use gas pipes,
telephone lines or other
potential lightening rods as
ground.
- Improper use of the ground
plug can result in electric
shock.
• Do not plug several appliances
into the same multiple power
board. The freezer should
always be plugged into its
own individual electrical which
has a voltage rating that
matched the rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires.
• Do not use a cord that shows
DA68-03009C-05.indd 4
DA68-03009C-05.indd 4
cracks or abrasion damage
along its length or at either
end.
• Do not bend the power cord
excessively or place heavy
articles on it.
• This freezer must be
properly installed and
located in accordance
with the manual before it
is used.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock of fire.
• Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power plug
upside down, wire can get cut
off and cause fire or electric
shock.
• When moving the freezer,
be careful not to roll over or
damage the power cord.
- This constitutes a fire hazard.
• Make sure that the power plug
is not squashed or damaged
by the back of the freezer.
• Keep the packing materials
out of reach of children.
- There is a risk of death from
suffocation if children put them
on their head.
English - 4
2015. 5. 13.
2015. 5. 13.
9:46
9:46
Advertisement
