Table of Contents
Advertisement
C
INFORMATION
• If a second auxiliary function conflicting
with the first one is selected before starting
the machine, the function selected first
will be canceled and the second auxiliary
function selection will remain active.
• An auxiliary function which is not
compatible with the programme
cannot be selected. (See "Programme
and consumption table")
• Auxiliary Function buttons may vary
according to the model of the machine.
4.3.10.1 Auxiliary functions
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.
C
INFORMATION
• Prewash without detergent is
recommended for tulle and curtains.
• Fast+
When this function is selected, durations of
relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
• Extra Rinse
This function enables the machine to carry
out another rinsing cycle in addition to the
one carried out after the main wash. Thus, the
risk for sensitive skins (babies, allergic skins,
etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds
• Drum Cleaning
To select this programme, press and hold the
auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean
the drum and ensure the required hygiene is
provided. Run the programme while the machine
is totally empty. To obtain better results, put
powder lime-scale remover for washing machines
into the detergent compartment no. "2". When
the programme is over, leave the loading door
ajar so that the inside of the machine gets dry.
16 / EN
C
INFORMATION
• This is not a washing programme.
It is a maintenance programme.
• Do not run this programme when there are any
objects in the machine. If you try to do so, the
machine will automatically detect that there is
load inside and abort the programme.
• Child Lock
You can prevent children from tampering with
the machine by using the Child Lock feature.
Thus you can avoid any changes in a running
programme.
C
INFORMATION
• If the Programme Selection knob is turned
when the Child Lock is enabled, "Con"
appears on the display. While the Child Lock
is enabled, you cannot make any change in
the programmes, the selected temperature,
the speed or the auxiliary functions.
• Even if another programme is selected
with the Programme Selection knob while
the Child Lock is enabled, previously
selected programme will continue running.
To enable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds. While you're holding the button
pressed for 3 seconds, C03, C02 and C01 will
be displayed respectively. Then, while the light
of the Auxiliary Function Button 2 is flashing,
"Con" will be displayed, indicating that the child
lock has been enabled. If you press any button
or turn the Programme Selection knob while the
Child Lock is enabled, the same warning will be
displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds while the programme is running.
While you're holding the button pressed for 3
seconds, C03, C02 and C01 will be displayed
respectively. Then, while the light of the
Auxiliary button 2 is flashing, "COF" will be
displayed, indicating that the child lock has
been disabled.
C
INFORMATION
• In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On/Off
position when no programme is running,
and select another programme.
• Child Lock will not be disabled after
a power failure or unplugging.
Washing Machine / User's Manual
Advertisement
Table of Contents
