Notes And Requirements - Fein ASCD 18-W2 Repair Instructions

ASCD 18-W2; ASCD 18-W4

3. Notes and requirements

Note
These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and
electrical training.
Only use original FEIN spare parts!
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in
serious risks to the user.
The provisions set out in DIN VDE 0701-0702
The relevant accident prevention regulations of the employers' liability insurance associations are to be observed when
commissioning.
The German Equipment and Product Safety Act applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed!
C-SC_CSSM Version 1.0
should be observed after repairs.
2014-07-09 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 5 of 33