Exiting From The Security Menu - Fujitsu Lifebook S2210 Bios Manual

L i f e B o o k S S e r i e s N o t e b o o k
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.
Main
Security Chip:
Clear Security Chip:
Security Chip State:
F1 Help
ESC Exit
Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu
Menu Field Options
• Disabled
Security Chip:
• Enabled
Clear Security Chip –—
Security Chip State: –—

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
PhoenixBIOS Setup Utility
Advanced Security Power Savings
Security Chip Setting
[Disabled]
[Enter]
Disabled
Deactivated
Select Item -/Space
Select Menu Enter
Figure 16. Security Chip Setting Submenu
Default Description
[Disabled] Allows you to enable or disable the security chip. Note that this is only
active if a Supervisor Password has been entered. A reboot is required after
exit to configure the Security Chip correctly. Clear Security Chip option
becomes selectable after reboot.
[Enter] This field is not selectable until after the security chip is enabled and the sys-
tem is rebooted.
–— Display only, to indicate the state of the chip if it has been enabled, dis-
abled, activated or deactivated.
Exit
Item Specific Help
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
24