Download Print this page

Beko HCA62640BE User Manual page 9

Hide thumbs Also See for HCA62640BE:

Advertisement

Available languages

Available languages

3
Operation of the Appliance
3.5 Replacement of Lamp
(Figure 3)
Make the electrical connections of the appli-
ance. Your appliance uses 3W spot LED lamp.
For replacing the lamps, push downwards
on the holder from its behind, turn it coun-
ter-clockwise, and take it out downwards.
Apply the above operation in reverse to install
new lamps (Figure 3).
Bulb
Bulb Power (W)
Holder / Socket
Bulb Voltage (V)
Size (mm)
ILCOS Code
Cooker Hood / User Manual
3
GZ 10
220 - 240
53 x 50
DR/F3-220-240-
GZ10-50-53
3.6
Operation
Connection
Vapour is extracted through
the flue duct, which is fastened
to the connection head on the
hood.
The diameter of the flue duct must be the
same as the connection ring. In horizontal
settings, the pipe has to have a slight up-
ward slope (around 10º) so that the air can
exit the room easily.
3.7 Operation without Flue
Connection
Air is filtered through the
carbon filter and recirculated in
the room. Carbon filter is used
when it is impossible to use a
flue in the house.
In flueless use, remove the flaps inside the
flue adapter.
Remove the grease filter. To install the car-
bon filter, fit the filter to the tabs by centring
it on the plastic piece on both sides of the
fan body. Tighten it by turning right or left.
Replace aluminium grease filter.
with
Flue
9 / EN

Advertisement

loading