Exit Menu - Leaving The Setup Utility - Fujitsu Lifebook P7120 Bios Manual

EXIT MENU - LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow the instructions for
make any changes. The table shows the names of the menu fields for the Exit menu and a description of the field's
function and any special information needed to help understand the field's use.
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
F1 Help
ESC Exit
Table 19: Fields, Options and Defaults for the Exit Menu
Menu Field Shortcut
Exit Saving Press the
Changes F10 key
Exit Discard- –—
ing Changes
Load Setup Press the
Defaults F9 key
Discard –—
Changes
Save Changes –—
Save Changes ___
and Power Off
PhoenixBIOS Setup Utility
Main Advanced Security
Select Item -/Space
Select Menu Enter
Figure 19. Exit Menu
Description
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS
memory and then exit the setup utility. A confirmation message Save Configuration changes and exit
now? [Yes] [No] will be displayed.
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS mem-
ory. When the BIOS recognizes this selection it will load the operating system and begin operation.
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display
the message Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to
the Exit Menu.
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message
Load previous now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit
menu.
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The
message Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup util-
ity will return to the Exit menu.
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS
memory, then power the system off. The message Save configuration changes now and
power off? will be displayed. When confirmed, the setup utility shut down the system.
Navigating through the Setup Utility
Power Savings Boot
Item Specific Help
Exit System Setup and
save your changes to
CMOS.
Change Values F9
Select Sub-Menu F10
E x i t M e n u
Exit
Setup Defaults
Save and Exit
to
25