Panasonic EP-MAG3 Operating Instructions Manual page 18

（Continued）
Assembly
5
Turn on the power and raise the backrest to the upright position.
❶ ●
Insert the power plug into the
power outlet.
●
Always be sure to insert into an AC
120 V plug.
❷ ●
Confirm the lock switch key
is set to the "open" position.
● ❸
Confirm the power switch is
set to the "on" position.
❹ ●
Press
●
Press once, and then press again approx. 1 second later.
Backrest will rise automatically.
6
Placing the controller
● ❶
Placing the controller
into the controller
stand.
● ❷
Fasten the controller
cord using the clip.
●
Fasten so the cable under
the clip will not sag too
much with the backrest
raised.
(Because there is a chance
of the cord becoming
tangled with your feet,
etc.)
EN18
on the controller twice.
❶ ●
❷ ●
❶ ●
❸ ●
❷ ●