Auto Adjust Execute - 3M S15 Operator's Manual

Multifunctional settings
IMAGE menu (continued)
Item Description
Using the buttons ▲/▼ adjusts the horizontal size.
Large  Small
• This item can be chosen only at a RGB signal.
H SIZE
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
pressing the RESET button during this operation.
Choosing this item performs the automatic adjustment feature.
 At a RGB signal
The vertical position, the horizontal position, the clock phase, the aspect
and horizontal size will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
 At a video signal
S-VIDEO · VIDEO:
The video format best suited for the respective input signal, the
AUTO ADJUST
vertical position, the horizontal position phase and the aspect will be
EXECUTE
automatically adjusted.
COMPONENT:
The vertical position, the horizontal position, the clock phase and
the aspect will be automatically adjusted.
This function is available only when the AUTO mode is selected at
the VIDEO FORMAT MENU. Refer to Page(32) of this manual.
For a component video signal, the signal type is automatically
identified, regardless of this function.
• The automatic adjustment operation requires approximately 10
seconds. Also please note that it may not function correctly with
some input.
© 3M 2005. 3M™ Digital Projector S15/X15
31