Soaking Laundry; Adding Laundry; Cancelling The Pro- Gramme; Resuming The Programme When The Programme Status Is Rinse Hold - Bosch WAN24109GB User Manual And Installation Instructiions

en Basic operation
Press Finish in repeatedly until the
2.
display indicates the desired
"Ready in" time.
Press Start / Reload.
3.
13.9 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start / Re-
load.
To resume the programme, after
3.
the desired soaking time, press
Start / Reload.
13.10 Adding laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press Start / Reload.
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
Add or remove laundry.
2.
Close the door.
3.
Press Start / Reload.
4.
13.11 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Press Start / Reload.
1.
Open the door.
2.
36
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high: Start
the Spin or Drain programme.
Remove the laundry.
3.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Set the Spin or Drain programme.
1.
Press Start / Reload.
2.
13.13 Unloading the laundry
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Open the door.
1.
Remove the laundry.
2.