Advertisement
Quick Links
Auditor 6M+MB
(Cellular monitoring with Modbus)
Complete these five easy steps,
then start monitoring your site.
1. Before you begin
2. Connect power and Modbus
3. Connect your CTs
4. Use the onboarding tool
5. Validate that your installation is correct
Check here for latest documents:
www.wattwatchers.com.au/support
Part #WW018060
Quick
Start
Guide
August 2020
Advertisement
Related Manuals for wattwatchers Auditor 6M+MB
Summary of Contents for wattwatchers Auditor 6M+MB
- Page 1 Quick Start Guide Auditor 6M+MB (Cellular monitoring with Modbus) Complete these five easy steps, then start monitoring your site. 1. Before you begin 2. Connect power and Modbus 3. Connect your CTs 4. Use the onboarding tool 5. Validate that your installation is correct Check here for latest documents: www.wattwatchers.com.au/support...
-
Page 2: Before You Begin
1. Before you begin What’s in the box: 1 x Auditor Power connection tails Green connector Modbus cable with connector TAILS MODUS CABLE WITH CONNECTOR GREEN CONNECTOR AUDITOR • Do you have at least 35mm space in the DIN rail mount to fit the Auditor? •... - Page 3 2. Connect power and Modbus Three-Phase Voltage Connections Use this configuration when there are multiple phases present. The voltage connections are labelled P1, P2, P3, N. Connect voltage phases to P1, P2, and P3. Connect neutral (Black) to N. Single-Phase Voltage Connections Use this configuration when one phase is present.
-
Page 4: Installation Of Current Transformers
The CTs and Voltage phases must match as stated below. CT connected to ... cables connected to ... 1+ and 4+ 2+ and 5+ 3+ and 6+ It is acceptable to use less than six Current Transformers. Find complete wiring diagrams at www.wattwatchers. com.au/support/wiring... - Page 5 4. Use the onboarding tool Use the onboarding tool at onboarding.wattwatchers.com.au to configure and setup your Auditor installation. The onboarding setup tool provides a series of steps to capture details of your setup and provide real-time feedback on the success of the installation.
-
Page 6: Check The Lights
Need help with your installation? Our team is available from 09:00 to 17:00, Monday to Friday AEDT Support phone: 02 8316 7540 (+61 2 8316 7540 from overseas) Support: For additional materials and to lodge a Support ticket, please visit: www.wattwatchers.com.au/support...