Apm Configuration; Pci Subsystem Settings - Asus ROG STRIX X570-I GAMING Manual

3.6.5

APM Configuration

The items in this menu allow you to set system wake and sleep settings.
ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
Restore On AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and configure the RTC alarm date. When enabled, you can set the days, hours,
minutes, or seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]
3.6.6

PCI Subsystem Settings

Allows you to configure PCI, PCI-X, and PCI Express Settings.
SR-IOV Support
This option enables or disables SIngle Root IO Virtualization Support if the system has
SRIOV capable PCIe devices.
Configuration options: [Disabled] [Enabled]
ROG STRIX X570-I GAMING
3-17