Removing and installing components during servicing
Attaching the cover
► Place the cover in the correct mounting position (1).
If you remove more than one component at the same time, keep the screws for the
individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.
► Tighten the screw (2).
► Insert the battery (see Chapter
Removing and installing the optical drive
Removing the optical drive
► Prepare for removal, see
Harddisk
► Remove the screw (1).
The drive is released.
► Pull the drive out of the drive bay (2).
52
"Inserting the battery", Page
"Preparing to remove components", Page
2
1
30).
1
Fujitsu Technology Solutions
48.
2