Related Manuals for KAR-TECH MCT247
Summary of Contents for KAR-TECH MCT247
- Page 1 MCT247 2.4GHz MODULAR TRANSCEIVER OEM INSTALLATION AND OPERATION MANUAL NOTE: THIS MODULE IS LIMITED TO OEM INSTALLATION ONLY July 27, 2020 HK/TH...
-
Page 2: Table Of Contents
MCT247 TRANSCEIVER INDEX DESCRIPTION ................2 OPERATION ................3 INSTALLATION ................. 4 BEFORE APPLYING POWER! ............6 TROUBLESHOOTING ..............6 TRANSCEIVER PICTORIAL ............6 SPECIFICATIONS ..............8 INSTRUCTION TO THE USER ............. 9 INDUSTRY CANADA STATEMENTS ........... 10... -
Page 3: Description
The MCT247 is not transceiver module designed to for sale by itself. be compatible with US (FCC CFR Part (15.247)), The MCT247 is not designed for Canadian (RSS-210), EU(RSS- multiple antenna applications Issue 2/RSS-GEN Issue should... -
Page 4: Operation
The data is There are no test modes built in sent through a serial port to RF to the MCT247. Host code is to processor and then to RF circuit be used to ensure compliance. to the antenna and the data received from antenna is sent to the serial port and to the host. -
Page 5: Installation
3) Place a label on the outside of the host enclosure in a visible area. On the label, include following: “Contains P4U- MCT247” and “Contains IC: 4534A-MCT247” 4) Connect appropriate antenna. A ¼ wavelength wire antenna. 5) Once integrated into a final... - Page 6 Part 2.1091 exposure purposes.” definitions mobile, portable fixed applications. E) Do not operate the MCT247 without an antenna. F) Documentations: host’s User Manual include the following: a. That there are no user...
-
Page 7: Before Applying Power
PARTS LIST PART NUMBER DESCRIPTION 021535C MCT247 RADIO TRANSCEIVER – WIRE ANTENNA There are no user-serviceable parts inside the transmitter or the receiver. Return the units for service. The information, specifications, and illustrations in this manual are those in effect at the time of printing. - Page 8 MCT247 TRANSCEIVER 1.8900 0.0900 0.1000 1.2500 1.1687...
-
Page 9: Specifications
Not Used VIN 3.3V SPECIFICATIONS Equipment Class ......Part 15 Spread Spectrum Transmitter FCC ID ................P4U-MCT247 ICC (Industry Canada Certification) ID ......4534A-MCT247 TRANSCEIVER Power supply ................3.3VDC Operating Current ................ 48mA Operating temperature - Radio ........-40˚C to +85˚C Storage temperature ........... -
Page 10: Instruction To The User
MCT247 TRANSCEIVER INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 11: Industry Canada Statements
MCT247 TRANSCEIVER INDUSTRY CANADA STATEMENTS This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. - Page 12 Conformity must be issued and kept on file as described in the Radio and Telecommunications Terminal Equipment (R&TTE) Directive. The ‘CE’ mark must be placed on the OEM product per the labeling requirements on the Directive. Declaration of Conformity (DOC) This DOC can be downloaded from the www.kar-tech.com.
- Page 13 3.6cm between the radiator & your body. 2.7 Antennas The following antenna will be used with the MCT247 module and integrated into Kar-Tech products,The MCT247 is not designed for multiple antenna applications and should not be used to transmit simultaneously with any other transmitter.