Connecting Windows 98/2000 Systems - Fujitsu Lifebook E7010 User Manual

B5FH-4491-01EN-00.book Page 105 Friday, April 19, 2002 11:24 AM

CONNECTING WINDOWS 98/2000 SYSTEMS

This chapter describes how to set the wireless LAN
connection for computers running Windows 98 or
Windows 2000.
P O I N T
When you receive your LifeBook, the integrated
wireless LAN device and drivers have already been
installed. This procedure outlines the steps for setting
the device parameters.
Updated drivers and/or utilities may become available
after this manual is printed; see any addenda or fliers
that may be included in the system packaging or visit
our web site at: www.fujitsupc.com for the latest
drivers..
Workflow
The proper setup of the wireless LAN requires several
steps which must be performed in the proper order.
Following is a general outline of the steps that must be
performed. Each step is detailed later in this procedure.
1. Setting parameters
Setting the profile
I
Setting the encryption
I
2. Network settings
Setting the protocol and checking the network
I
Setting file and printer sharing
I
I Checking the connection
Setting Parameters
1. Click [Start]-> [Settings] -> [Control Panel].
2. Double-click the [PRISM Settings] icon. The
[PRISM Wireless Settings] appears.
3. Set the profile as specified in Table 1. Ask your
network administrators to check the setting.
4. When you finish your entry, click [Apply].
Item
Profile Enter the system file name in which the
parameter information is to be saved.
Mode Ad Hoc Network: Click the down arrow
and select "802.11 AdHoc".
Infrastructure Network: Click the down
arrow and select "Infrastructure".
SSID Enter the network name to which you
want to connect
Description
W I r e l e s s L A N U s e r ' s G u i d e
Item Description
Transmit Obtain the information from your
Rate network administrator. If you do not
have a network administrator, select
"Fully Automatic".
Power Not supported.
Save
Enabled
AdHoc AdHoc Network: Select the same
Channel channel, 1-11, for all connected
computers. If there is more than one
wireless LAN nearby (such as on the
same floor), we recommend that the
channels for each LAN be 5 numbers
apart (e.g., if there are two other LANs
nearby, the channels used should be 1,
6, and 11).
Infrastructure Network: Not an option.
Table 1: Profile Parameters
5. Click the [Encryption] tab.
6. Set the encryption items in accordance with Table 2.
AdHoc Network: Specify the same value for all the
I
computers for which the encryption key is used for
connection.
Infrastructure Network: Specify the identical
I
encryption keys to the encryption keys set for the
access point. For instructions on how to check the
encryption keys set for the access point, refer to the
access point manual.
P O I N T
Make sure that you specify the encryption keys. If you
do not specify the keys, any computer with a wireless
LAN card can be connected. This presents a risk that
your data may be stolen or destroyed.
105