Advertisement
L i f e B o o k E S e r i e s B I O S
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Password on Boot:
Disabled
First Boot
Every Boot
Password on
Disabled
Unattended Boot
Enabled
Password on
Disabled
Resume:
Enabled
Boot from Remov-
All
able Media:
Supervisor only
Floppy Disk
All
Access:
Supervisor only
Hard Disk Security:
–—
Owner
–—
Information:
Hard Disk Boot
Normal
Sector:
Write Protected
Security Panel on
Disabled
Resume
Enabled
Exiting from the Security Menu
When you have finished setting the parameters on the
Security Menu, you can either exit from setup utility or
move to another menu. If you wish to exit from setup
utility, press the Esc key to go to the Exit Menu. If you
wish to move to another menu, use the cursor keys.
24
Default
Description
[Disabled]
When set to First Boot, a password (User or Supervisor) is required
just once after the Power On Self Test (POST) before the operating
system will be read from a disk. When set to Every Boot, a pass-
word (User or Supervisor) is required every time after the Power On
Self Test (POST) before the operating system will be read from a
disk. When set to Disabled no password is required.
[Disabled]
When Enabled, a PS/2 keyboard and mouse are locked out when
an unattended boot occurs via LAN until a password is entered.
[Disabled]
When set to Enabled, a password (User or Supervisor) is required
before the operating system will resume. When set to Disabled no
password is required. If no Supervisor Password is set this feature is
not available and no password is required.
[All]
Enable password allows supervisor access only.
[All]
Enable password allows supervisor access only.
–—
Configures hard disk security features
–—
Sets Owner information.
[Normal]
Sets protection mode for hard disk drive.
Enabled
Enables or disables the Security Panel feature upon Resume from
Suspend.
Advertisement
