Fujitsu Lifebook E2010 User Manual page 115

Problem
I want to remove
the driver
(Windows 2000)
Possible Cause
W I r e l e s s L A N U s e r ' s G u i d e
Possible Solution
Windows 2000:
When removing the driver, make sure that the device is
attached to the computer. If you try to remove the driver while
the device is detached from the computer, the driver is not
removed.
1. Right click the [My Computer] icon on the desktop, and
then click [Properties] from the menu that appears. [System
Properties] appears.
2. Click the [Hardware] tab.
3. Click [Device Manager...]. The [Device Manager] window
appears.
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless LAN PCI Card], and
click [Uninstall] from the menu that is displayed. [Confirm
Device Removal] appears.
6. Click [OK].
7. Close [System Properties].
8. Make sure that the icon has disappeared from the task tray
in the lower right corner of the screen.
9. Click [Start] -> [Settings] -> [Control Panel].
10. Double-click [Add/Remove Programs]. [Add/Remove
Programs] appears.
11. Perform the following steps.
Click [PRISM 11Mbps Wireless LAN for Windows].
Click [Change/Remove].
A window appears asking you if you really want to remove the
driver.
12. Click [Yes].
When the driver is removed, a window appears showing that
the driver has been removed.
13. Click [OK].
14. Close [Add/Remove Programs] and [Control Panel].
15. Shut down Windows, and turn off the computer.
109