Power Off - Fujitsu LifeBook C-4235 User Manual

POWER OFF

Before turning off the power by choosing Shut Down
from the Windows 98 Start menu, check that the Hard
Drive, DVD/CD-ROM, CD-RW, PC Card and the
Floppy Disk Drive Access indicators are all Off. (See
figure 2-4 on page 12) If you turn off the power while
accessing a disk or PC Card there is a risk of data loss. To
assure that your notebook shuts down without error, use
the Windows shut down procedure.
P O I N T
You may also use the Suspend/Resume button to shut
off your notebook. To do so, first press the Suspend/
Resume button to suspend your notebook. Next press
and hold the button again until your notebook shuts
off. However, in Windows you should always use the
correct way to shut down your notebook. From the
start menu select shut down.
G e t t i n g S t a r t e d
C A U T I O N
Never turn your notebook off while an application is
running. Be sure to close all files, exit all applications,
and shut down your operating system prior to turning
off the power with the power switch. If files are open
when you turn the power off, you will lose any changes
that have not been saved, and may cause disk errors.
Using the correct procedure to shut down from Windows,
allows your notebook to complete its operations and turn
off power in the proper sequence to avoid errors. The
proper sequence is:
1. Click the Start button, and then click Shut Down.
2. Select the Shut Down option from within the
Windows Shut Down dialog box.
3. Click OK to shutdown your notebook.
If you are going to store your notebook for a month or
more see Care and Maintenance Section.
41